ALUMINUM SELF ADHESIVE BITUMEN TAPE
Aluminum Tape is self adhesive tape comprising an Aluminum backing bonded to a tough adhesive compound. It is ideal for use in new, repair and refurbished situations.
Quick to apply
Wide range of sizes
Easy to apply
Replacement of lost lead flashing.
Flashing of skylight and glazing bars.
Sealing capping bolts and roof ridges.
Repair to guttering and down pipes.
Construction and repair of portable buildings.
Construction and repair of Conservatories.
Construction and repair of caravans.
ALUMINUM FLASHING TAPE DESCRIPTION
Aluminum Tape is a strong self-adhesive flashing Tape comprising an aluminum foil and a bitumen rubber adhesive. The adhesive from a strong waterproof seal by the simple action of pressing the tape into place by hand.
Bond Strength to primed concrete 3.5 N/mm.
Flexibility at -15Deg C No. Cracking.
Application temperature ranges 5 to 45 Deg C.
All surfaces must be dry, sound and free from oil, grease and dust. Remove all loose material by scraper or wire brush. Porous surfaces, such as concrete of brick should be primed by brush using Bitumen primer (SSC BITU BOND) and allowed to dry.
Cut the tape to the required length, peel back approximately 5 cm. Of release carrier and place tape into position. Continue removing the release carrier whilst firmly placing the tape to avoid unnecessary creasing. Ensure intimate contact and that no air is trapped. Using a cloth or small roller to ensure all edges and forming proper seals.
Overlaps should beat least 25mm.
50mmX 10 Mtr